SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jibs - The lift truck jib will allow a worker to be able to transfer their heavy loads overtop of obstacles or obstructions on top of roofs, elevated platforms, and even decks. They can be used so as to reach the second and even third level building platforms so as to move or pick up loads at places that are still under construction. Fork truck jibs are actually utilized to deliver trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are even typically used for reaching over scaffolding meant for masonry work.
Each jib boom forklift attachment consists of two swivel hooks. One hook could be manually fixed to any position on the boom's bottom and the second hook is fixed at the end of the jib. This allows the individual operating it to be able to pick up any load which has two hook points. Dependent on the dimensions of the model, each hook is rated at either 4 thousand or 6 thousand lbs. It is possible to utilize either one hook or two in order to carry a load. The individual operating it has to be sure that the entire weight of the jib and the load will not exceed the rated capability of the jib as shown on the load chart for that extended or retracted position.
Attachments jibs can be used on rough terrain straight-mast lift trucks, industrial forklifts, or on extendable-reach forklifts. The forklift jib cranes could be installed onto the forklift through inserting both of the forks into the fork pockets. The back of the jib crane then seats against the rear of the fork and a safety chain wraps the forklift carriage to hold it into place.
Load Capacity for the Jib Boom Forklift Attachment
The maximum load capacity for forklift jibs in both the retracted or extended positions range from 1935 lbs to 6000 pounds. It's a good idea to ask a material handling specialist about the limits for your specific use. The load capacity rankings are really meant for the jib itself and not the lift truck or the utmost load which could be moved safely making use of a certain lift truck. It is very important bear in mind that at any time when whichever attachments such as a lift truck jib are attached to the lift truck, the new center of gravity made by the accessory will reduce the overall lift capability of the forklift. There are directions obtainable which offer information on how to accurately determine these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Previous to using a forklift jib, make certain that it is well secured to the lift truck with shackles and hooks. Continuously be sure to be able to verify that the screw pins are tight. It is essential to also double check that the load calculations have been made properly. Keep in mind to take into consideration the fact that rated capacities occasionally lessen when the boom is in an elevated position, each time the boom is fully extended with telehandlers or whenever the mast is slanted frontward.
Essential suggestions whenever making use of an adjustable jib is not to ever pull a load utilizing this type of accessory. These types of additions are actually only used for vertical raising. Furthermore, avoid letting the load move to and fro. Use extreme caution each time a load is lifted so as to avoid tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 562-274-7605
13337 SOUTH ST 567
Norwalk, California
forkliftpartsnorwalk.com
Email Us
About Us